Tag: Materials

01
Dec

Titan Robotics and Infinite™ Material Solutions Collaborate on Novel Water Soluble 3D Printing Materials

Titan and Infinite™ host Webinar Dec. 3 on Use of Infinite™ AquaSys® Water Soluble Support Materials on Titan’s Industrial Pellet and Hybrid Extrusion based Atlas Platform

December 1, 2020  – Titan Robotics, Ltd. and Infinite™ Material Solutions announce a strategic partnership to provide novel water soluble materials for industrial additive manufacturing applications. The collaboration between the two companies leverages Titan’s production additive manufacturing platforms with pellet and multi-head extrusion systems with Infinite™ Material Solutions’ AquaSys® materials portfolio. These materials can be used as both water soluble support materials compatible with a variety of structural polymers and in soluble core applications.

3D Printed Soluble Core out of AquaSys® 180 pellets
Soluble Core 3D printed on Titan’s Atlas with AquaSys® 180 pellets

Titan’s state-of-the-art Atlas 3D printers with Hybrid Pellet + Filament Extrusion and Dual Pellet Extrusion systems enable the use of dual materials to be printed using low-cost pellet feedstocks. With the Atlas’ heated enclosure reaching 80°C (176°F), industrial customers can print complex geometries using high-temperature pellet materials such as carbon fiber filled PEI or glass fiber filled PEKK with AquaSys® 180 high-temperature water soluble support material in either pellet or filament form. Customers can also print engineering materials like Nylons, ABS, PC and more with AquaSys® 120 general purpose water soluble support material in either pellet or filament form

“As an industrial additive manufacturing solutions provider, Titan’s production-ready systems and technology are an ideal fit with Infinite™ Material Solutions’ innovative and disruptive materials,” said Titan CEO Rahul Kasat. “Titan’s mission is to enable the adoption of additive manufacturing into industrial production, and materials like AquaSys® 120 and 180 make that possible by enabling the use of engineering grade materials with a water soluble support material. This enables our industrial customers to print more complex geometries without worrying about impacting surface finish during support removal.”

Together, Titan and Infinite™ are working to transform 3D printing and break down barriers to its adoption in industrial production. As part of the collaboration, Titan and Infinite™ are hosting an informative joint webinar on December 3, 2020, that will highlight several industrial 3D printing applications and techniques including Hybrid Pellet + Filament Extrusion and include advanced tips and tricks for dual material 3D printing.

“Infinite Material Solutions has been collaborating with Titan for the past two years and share a common vision of the future in additive.  The two teams share a common goal to provide disruptive solutions to the AM market; a printing platform and novel materials to enable ultimate user innovation.  We see huge potential for customers / end users to unlock new opportunities,” said Larry Doerr, Chief Operations Officer at Infinite™ Material Solutions.

3D printed duct GF PEKK and AquaSys® 180
3D Printed Aerospace Intake Duct out of Glass Fiber PEKK pellets and AquaSys® 180 filament

The collaboration between Titan Robotics and Infinite™ Material Solutions gives customers the advantages of selecting the right materials for their industrial applications without sacrificing part design or performance.

As an authorized distributor of Infinite™ Material Solutions 3D printing pellet materials, Titan will support their ongoing development of new material formulations for pellet extrusion 3D printing on the Atlas platform.

Be sure to join Titan and Infinite™ for an exciting webinar on 3D Printing Day – December 3, 2020 at 1pm MST! Register for the webinar Here.

About Pellet Extrusion on the Atlas

Pellet extrusion on the Atlas enables production additive manufacturing solutions by printing directly with plastic pellets instead of traditional filament. Pellet extrusion increases throughput and decreases material costs, while also expanding the variety of materials that can be 3D printed.

Pellet Extrusion on the Atlas enables order of magnitude material cost savings compared to traditional 3D printing filaments and the ability to print with hundreds of grades of resins. From flexible, low durometer materials up to high-performance and highly filled engineering materials, pellet extrusion on the Atlas utilizes open market materials.

Pellet Extrusion on the Atlas also enables the ability to print large, production parts due to the faster print speeds and higher through-put on the Atlas. Flow rates range from 1 lbs to 30 lbs per hour and prints speeds can top out at 30,000 mm per minute, reducing production time from days to hours.

The combination of reduced feedstock cost and faster print speeds provides reduced operational costs and faster cycle times with organic capacity.

About Titan Robotics

Titan Robotics, Ltd. is a production additive manufacturing solutions provider. Titan designs and fabricates large-format, purpose-built 3D printers, and provides solutions to its customers by developing processes using Titan’s additive manufacturing technology. Specializing in direct pellet fed 3D printing and high flow filament 3D printing, Titan’s large-format systems enable the use of engineering grade and commodity materials. Titan provides complete additive manufacturing implementation, from manufacturing on demand through its printing services, to consulting and material integration processes. Learn more at Titan’s website: www.titan3drobotics.com

Titan Robotics Contact:Connect with Titan Robotics:
Maddie GuilloryLinkedIn: www.linkedin.com/company/10037660
Maddie@titan3drobotics.comFacebook: www.facebook.com/titan3drobotics
Cell: 972-333-6323Instagram: www.instagram.com/titan3drobotics
www.titan3drobotics.comTwitter: https://twitter.com/titanrobotics3d
17
Nov

Titan Robotics and Jabil Collaborate on Engineered Materials for Large-Format Industrial Additive Manufacturing

Titan and Jabil validate new formulation for pellet extrusion on Titan Atlas printers

November 17, 2020  – Titan Robotics, Ltd. today announced a strategic collaboration with Jabil Inc. to accelerate the adoption of large-format, industrial additive manufacturing. Jabil Engineered Materials, a unit of Jabil, which develops innovative polymer formulations and compounds at its ISO 9001 Materials Innovation Center, is working with Titan to qualify and integrate customized materials for use on Titan’s pellet-based Atlas 3D printers.

Together, the companies are driving the production of large-format tooling for applications in, sheet metal forming, composite layups, welding fixtures, molding, casting patterns and end-use parts on Titan Atlas printers to meet a growing need for increased part strength and faster printing speeds. Jabil’s specialized materials science expertise, combined with Titan’s robust printing performance, are ideally suited for addressing the growing list of rigorous industrial, as well as demanding medical, defense and aerospace applications.   

“Titan and Jabil are fulfilling a joint mission to move additive manufacturing into serial production and advanced manufacturing,” said Titan Robotics Partner and CTO, Bill Macy. “By choosing Jabil’s engineered materials customized for applications with high-throughput pellet printing on the Atlas, we can help customers reduce costs, create products with mass customization, reduce cycle times and innovate quickly.”

Titan and Jabil have tested and validated new pellet formulations of Jabil’s carbon fiber reinforced nylon materials, which are designed to produce stronger, lighter and more flexible parts. “Jabil takes a polymer science approach to developing engineered materials,” said Matt Torosian, director of additive product management at Jabil. “All of our materials are designed exclusively for additive manufacturing, so Titan receives pellets that embody all the necessary attributes to optimize performance and reliability.”

The collaboration between Titan Robotics and Jabil gives customers greater choices from a wide variety of high-performance pellet materials as well as the opportunity to create custom compounds to address specific requirements. By teaming, both organizations also offer an intermediate yet vital step to validate materials and part designs before customers print extremely large and costly, high-end final parts.

As an authorized distributor of Jabil’s 3D printing pellet materials, Titan will support Jabil’s ongoing development of new material formulations for pellet extrusion 3D printing on the Atlas platform.

About Pellet Extrusion on the Atlas

Pellet extrusion on the Atlas enables production additive manufacturing solutions by printing directly with plastic pellets instead of traditional filament. Pellet extrusion increases throughput and decreases material costs, while also expanding the variety of materials that can be 3D printed.

Pellet Extrusion on the Atlas enables order of magnitude material cost savings compared to traditional 3D printing filaments and the ability to print with hundreds of grades of resins. From flexible, low durometer materials up to high-performance and highly filled engineering materials, pellet extrusion on the Atlas utilizes open market materials.

Pellet Extrusion on the Atlas also enables the ability to print large, production parts due to the faster print speeds and higher through-put on the Atlas. Flow rates range from 1 lbs to 30 lbs per hour and prints speeds can top out at 30,000 mm per minute, reducing production time from days to hours.

The combination of reduced feedstock cost and faster print speeds provides reduced operational costs and faster cycle times with organic capacity.

About Titan Robotics

Titan Robotics, Ltd. is a production additive manufacturing solutions provider. Titan designs and fabricates large-format, purpose-built 3D printers, and provides solutions to its customers by developing processes using Titan’s additive manufacturing technology. Specializing in direct pellet fed 3D printing and high flow filament 3D printing, Titan’s large-format systems enable the use of engineering grade and commodity materials. Titan provides complete additive manufacturing implementation, from manufacturing on demand through its printing services, to consulting and material integration processes. Learn more at Titan’s website: www.titan3drobotics.com

Titan Robotics Contact:Connect with Titan Robotics:
Maddie GuilloryLinkedIn: www.linkedin.com/company/10037660
Maddie@titan3drobotics.comFacebook: www.facebook.com/titan3drobotics
Cell: 972-333-6323Instagram: www.instagram.com/titan3drobotics
www.titan3drobotics.comTwitter: https://twitter.com/titanrobotics3d
14
Mar

Titan Collaborates with Global Material Suppliers for Live Printing of High-Performance Materials at AMUG 2019

CHICAGO, IL – Titan Robotics, Ltd. will showcase for the first time its state-of-the-art, industrial Hybrid Atlas 3D Printer with Pellet and Filament Extrusion capabilities at this year’s Additive Manufacturing Users Group conference. To demonstrate printing of production parts using high-performance materials on the Atlas 3D printer platform, Titan is excited to partner with three of the top chemical companies serving the Additive Manufacturing industry: Arkema Inc., DuPont™ and NatureWorks.

As a leader in advanced, production-ready AM machines and technology, Titan’s expertise continues to grow in both pellet extrusion 3D printing and high flow filament extrusion 3D printing. As a solution provider to industrial customers, Titan continues to partner with global materials companies to offer high-performance materials to make functional parts.

Titan will be printing with three unique materials on the Atlas 3D Printer during the AMUG Expo, March 31 and April 1. AMUG Expo attendees will have the opportunity to witness high speed printing of these materials from Arkema, DuPont™ and NatureWorks. Representatives from Titan and the material companies will be at the Titan booth to discuss printer capabilities, material properties and, customers’ application needs.

AMUG logo

Printing Schedule During AMUG Expo

Sunday, March 31, 5pm – 9pm: Arkema’s Kepstan® PEKK

Kepstan® PEKK
Kepstan® PEKK by Arkema

A high temperature, high performance material, Kepstan® PEKK is an ideal material for production applications due to its high strength, ease of processing, flame retardancy, low outgassing, dielectric properties, and chemical resistance. Titan will conduct live printing of Kepstan® PEKK with glass fiber in pellet form during the first night of AMUG.

Monday, April 1, 10am – 2pm: NatureWorks’ Custom Ingeo™ PLA for Additive Manufacturing

Ingeo™ PLA
Ingeo™ recycled PLA pellets & Ingeo™ 3D450 breakaway filament by NatureWorks

NatureWorks has developed a series of Ingeo™ PLA 3D printing materials specifically designed to meet the performance requirements of industrial-use parts including high strength, heat resistance, and even clean incineration for foundry applications while maintaining printability. Expanding this portfolio, NatureWorks has recently introduced Ingeo 3D450, a breakaway material combining great printability and tailored adhesion ideal for building with supports, with a clean breakaway that minimizes the need for post-processing. Titan will conduct live printing with these materials on its Atlas Hybrid Pellet + Filament Extrusion system while also showcasing a proof-of-concept Ingeo polymer made from a blend of post-consumer and post-industrial recycled materials.

Monday, April 1, 5pm – 9pm: DuPont™ Hytrel® TPC-ET

DuPont™ Hytrel®
DuPont™ Hytrel® TPC-ET 3D printing material

DuPont™ Hytrel® TPC-ET 3D printing material is a versatile copolyester that combines the flexibility of rubber with the strength and processability of thermoplastics. It blends heat and chemical resistance with strength, resilience and durability. Titan will conduct live printing of DuPont™ Hytrel® in pellet form during the second night of AMUG.

Please stop by Titan’s exhibit booth, #78, at the AMUG conference and Expo at the Hilton Chicago, March 31 – April 1, 2019.

Kepstan® is a registered trademark of Arkema

Ingeo™ is a registered trademark of NatureWorks

Hytrel® is a registered trademark of DuPont™

05
Feb

Our Biggest Year Yet: Titan Robotics Gears Up for 2019 Expos

Titan Robotics is excited to unveil our latest products at several of the biggest additive manufacturing events and expos this Spring! You’ll have a chance to see Titan’s newest industrial 3D printers in action and meet the Titan Robotics team at three events across the country.


AMUG logo2019 will be the first year Titan Robotics showcases an Atlas 3D printer at the Additive Manufacturing User’s Group (AMUG) conference, held this year in Chicago, March 31 – April 4, 2019. The AMUG expo is much more than a trade show, with an intimate setting focused on sharing information and networking. Not open to the general public, the AMUG expo is exclusively for conference attendees and innovative companies like Titan Robotics demonstrating the latest in AM technology.

Titan will be printing with several unique materials (announced at a later date) during the AMUG expo on the Atlas 3D printer with the hybrid pellet + filament extrusion system. Materials being printed will include high temperature and high performance polymers. The Titan team and materials experts will be on hand to answer questions and discuss your specific application needs.  Register to attend AMUG here and visit Titan Robotics at Booth 78! (Early registration pricing ends March 2, 2019)



cast expo

Titan Robotics will also be exhibiting at CastExpo for the first time, held this year in Atlanta from April 27 – 30, 2019. Occurring every three years, CastExpo is the largest North American gathering of the metalcasting supply chain companies. Titan Robotics is excited to share how 3D printing and Titan’s line of Atlas 3D printers can improve pattern making processes with lower cost patterns, faster turn around time and better ROI.

3D Printed PatternTitan will showcase a wide variety of examples, demonstrating how pellet extrusion and filament extrusion on the Atlas can be a game changer for foundries of all kinds. To register for CastExpo 2019 using Titan’s unique code, click hereAnd come visit Titan Robotics at Booth 2818!


Rapid + TCTThis will be Titan’s biggest year yet at RAPID+TCTthe largest 3D printing event in North America! Held this year in Detroit from May 20 – 23, 2019, the RAPID+TCT trade show is the most comprehensive event in the Additive Manufacturing industry. Each year Titan’s presence has grown more prominent at RAPID, and 2019 will be no exception. With multiple machines on the show floor, Titan will unveil its latest developments and new technology at RAPID 2019!

Atlas 2.5 enclosureThis event will also be an opportunity to see a wide range of unique and new materials being printed live in the Titan booth. As always, Titan’s experts will be on hand to answer your questions, discuss unique applications and demonstrate our cutting edge AM technology. Contact Titan Robotics to receive your FREE pass to the RAPID+TCT Expo! We look forward to seeing you at the Titan Booth 527!